| World Wide | Lithium Polymer Battery Chargers | Free Shipping |
 |
Elite 5i-BC Charger / Balancer | In Stock $105.95 | |
|
User Manual |
Built-In Balancer (requires Align taps)
1~5 cells Li-Poly charger / balancers (no Li-Fe) 1~14 cells NiCad/NiMH 1~6 cells Lead Acid 0.1~5.0A charge current (50 watts max) Temperature Sensor Port 10~18 volt DC input or 12 volt AC input Includes: 12.0V 5.0A AC power supply Multi-Functional output leads All connector shown on user manual Temp Sensor See our adapters if you need required Align tap |
||
 |
Hyperion HP-EOS0403i Charger / Balancer | In Stock $69.95 | |
|
User Manual |
Integrated (built-in) Hyperion LBA Balancer
2~4 cell Li-Poly or A123 charger / balancers 4 cell at 3.0A max charge rate Great beginners charger / balancer Includes: Input cable with clips Output cable with 4mm male connectors 2S~4S balancer multi adapter Available Now: 6" balancer board extension harness |
||
 |
Hyperion HP-EOS0610i DUO Charger / Balancer | In Stock $269.95 | |
|
User Manual |
Two integrated (built-in) Hyperion LBA Balancer
1~12 cell Li-Poly, Li-Ion or A123 charger / balancers 1~16 cell NiCad / NiMH 1~12 cell Sealed Lead Acid 2 x 6S, 360 watts Includes: Input cable with 4mm Male Connectors + Clamps 2 sets output cable with 4mm connectors 2 balancer multi adapters HP-LBA10-HP Available Now: USB Programmer Cable for upgrades 6" balancer board extension harness Temperature Sensor |
||
 |
Hyperion HP-EOS0610i Charger / Balancer | In Stock $169.95 | |
|
User Manual |
Integrated (built-in) Hyperion LBA Balancer
1~6 cell Li-Poly, Li-Ion or A123 charger / balancer 1~16 cell NiCad / NiMH 1~12 cell Sealed Lead Acid 6S, 10A, 250 watts Network 2 units for 500 watts using EOS-0610i-MSC Includes: Input cable with 4mm Male Connectors + Clamps Output cable with 4mm connectors 2S~6S balancer multi adapter HP-LBA10-HP Available Now: USB Programmer Cable for upgrades 6" balancer board extension harness Temperature Sensor |
||
| Network Cable For Charger Above |
Hyperion HP-EOS0610i-MSC Network Adaptor Network 2 of the above chargers for 500 watts of power |
In Stock $4.80 |
 |
Hyperion HP-EOS0606i AC/DC Charger / Balancer | In Stock $139.95 | |
|
User Manual |
Integrated (built-in) Hyperion LBA balancer
1~6 cell Li-Poly, Li-Ion or A123 charger / balancer 1~14 cell NiCad / NiMH 1~6 cell Sealed Lead Acid 6S, 6A, 50 watts 10 User-definable Memory Positions Includes: AC input cable DC input cable with Clamps 2S~6S balancer multi adapter HP-LBA10-HP Available Now: USB Programmer Cable for upgrades 6" balancer board extension harness Requires: Output cable with 4mm male |
||
 |
Hyperion HP-EOS0606i DC Charger / Balancer | In Stock $99.95 | |
|
User Manual |
Integrated (built-in) Hyperion LBA balancer
1~6 cell Li-Poly, Li-Ion or A123 charger / balancer 1~14 cell NiCad / NiMH 1~6 cell Sealed Lead Acid 6S, 6A, 50 watts Includes: Input cable with Clamps Output cable with 4mm connectors 2S~6S balancer multi adapter HP-LBA10-HP Available Now: USB Programmer Cable 6" balancer board extension harness |
||
 |
Hyperion HP-EOS1210i Charger | In Stock $159.95 | |
|
User Manual |
1~12 cell Li-Poly, Li-Ion or A123 charger
1~30 cell NiCad/NiMH 180 watts, 10.0 amps max LBA10 Balancer Data Port Includes: Input cable with 4mm Male Connectors + Clamps Output cable with 4mm connectors Available Now: Temperature Sensor |
||
 |
Hyperion HP-EOS1210i-SEN Temp Sensor | In Stock $8.95 | |
|
Temperature Sensor for EOS1210i, EOS0610i, EOS0610i DUO or any Hyperion Charger with a Temp Sensor Port HP-EOS12-SEN |
|||
|
Hyperion HP-EOSPCCBL Adapter Harness
Hyperion HP-TI-PRGUSB USB Adapter |
In Stock $24.95 | |
|
You get both cables required to update your EOS610i / EOS610i DUO
Firmware Upgrades
EOS0606i (both DC or AC/DC) PC Logging Software USB Cable Data Sheet |
|||
 |
Thunder Power TP610C Li-Poly Super Charger | In Stock $129.95 | |
|
User Manual |
Will charge, balance, discharge and cycle batteries
Up to 10.0A, 80 watts max 1~6 cell Li-Poly / A123 cells 14 cell NiCd / NiMH 6V, 12V or 24V Sealed Lead Acid Includes: 2S-6S adapter for TP or Align battery taps Requires: Output cables with 4mm male |
||
 |
Thunder Power TP1010C Li-Poly Super Charger | In Stock $199.95 | |
|
User Manual |
1~10 cell Li-Poly charger
220 watts, 10.0Ah to 5 cells Data port for TP205V or TP210V balancers Includes: Data Port Cable |
||
 |
Thunder Power TP-PGM-01-V2 USB Programmer Cable | In Stock $29.99 | |
| USB programmer
5' USB cable 8" 6 pin locking connector for V.185 systems 8" 6 pin non-locking connector for all other versions Includes required resistor Important Upgrade Instructions Programmer Instructions |
|||
|
|
|||
| TP210V Combo | TP1010C Charger & TP210V Balancer Combo | In Stock $289.90 | |
| TP205V Combo | TP1010C Charger & TP205V Balancer Combo | In Stock $249.90 | |
 |
Thunder Power TP535C Li-Poly Charger | In Stock $57.95 | |
|
User Manual |
1~5 cell Li-Poly charger
3.5A max at 3 cells, 3.0A max at 4 cells Communication port for TP balancers Includes: Data Port Cable |
||
|
|
|||
| TP210V Combo | TP535C Charger & TP210V Balancer Combo | In Stock $147.90 | |
| TP205V Combo | TP535C Charger & TP205V Balancer Combo | In Stock $107.90 | |
 |
Thunder Power TP425C Li-Poly Charger | In Stock $54.95 | |
|
User Manual |
1~4 cell Li-Poly charger
300, 500, 800, 1300, 2000 & 2500mAh settings Safe mode automatic cell count Push button controls |
||
|
|
|||
| TP210V Combo | TP425C Charger & TP210V Balancer Combo | In Stock $144.90 | |
| TP205V Combo | TP425C Charger & TP205V Balancer Combo | In Stock $104.90 | |
 |
Thunder Power TP1205P Power Supply | In Stock $28.99 | |
|
Power supply for TP425C / TP535C
Input: 110-115VAC Output: 12.0VDC, 5.0A Power cord included Equiv to Model# WT-5133 / TP-1205P |
|||
|
Poly RC, Enerland, A123 Racing, Thunder Power, Polyquest, Air Thunder, Elite & Hyperion Li-Poly/Li-Ion
Batteries distributed by RC Lipos, Inc are approved only for the Radio-Control
Market. Use in any other application is not permitted without prior approval.
Charging, discharging, use for Electric Motors and Flying Models may cause
serious personal injury or property damage. In purchasing/using Lithium
Polymer Batteries, the buyer/user, agrees to accept all responsibilities of
these risks and not to hold RC Lipos Inc, its Distributors or Retailers (including all owners and employees) responsible for
any accidents, injury to persons, or damage to property.
Since many Radio-Control applications exceed the manufacturer's recommended maximum discharge rates, there is no warranty (expressed or implied) by the manufacturer, its Distributors and Retailers in respect to the Cycle Life, Capacity, Cell Characteristics or Storage of cells/packs used in the Radio-Control market. |